Product Introduction
Iron powder forming agent/steel slag powder pellet adhesive/fluorite powder adhesive wholesale, our company has developed it with the Clean Coal Chemical Research Institute for many years, specializing in fluorite powder, iron ore powder, etc. used in steel plants. Manganese ore powder, nickel ore powder, phosphate ore powder, copper, lead, zinc and other ore powders and sludge produced in sintering, iron-making, steel-making and other processes, sintering return ore, dust bag materials, steel slag magnetic separation materials, iron oxide scale, etc. A series of binders have been developed for iron-containing scraps, which can be processed into cold-pressed pellets. The pellet binder is processed from [pure natural green environmentally friendly raw materials, does not contain sulfur and phosphorus], and has hydrophilicity, complexing, rapid setting, redox and other properties. It is not only suitable for the molding and granulation of various ore powder raw materials in the metallurgical industry, but also suitable for the molding and granulation of iron-containing dust and mud waste, which can solve the problem of strict grade requirements for iron ore powder raw materials in existing sintering plants, serious decline in grade of sintered pellets, and energy consumption. Advanced issues
Product features
, Does not add any ash content, does not reduce calorific value, is not flame retardant (has a combustion-supporting effect), strong adhesion, good molding effect, uniform and beautiful appearance
, easy to use , each ton of adhesive can produce tons of cold-set pellets (blocks), one-time molding, the molding rate is as high as 1,000 tons, the dry pellets are 1 meter high and do not fall apart, they can be dried naturally or in the oven, and the cold strength after drying is kilograms / ball, high temperature resistance, particle size can be large or small, naturally cured, waterproof and moisture-proof.
. It has changed the current situation that iron ore powder can only be rolled into balls, and the production efficiency has been improved
. It does not contain sulfur, phosphorus, carbon, etc. which are taboos in smelting. It is a purely organic binder. It can be used to press briquettes of metallic minerals and non-metallic mineral powders
, and cold-pressed pellets with an iron content of more than two tons. Two tons of steel pellets can produce tons of steel. Add cold-pressed pellets to steelmaking at the right time, which solves the problem of steelmaking process. The refractory phenomenon in the slag is reduced, and the melting point of the slag is reduced, ensuring the good fluidity of the slag.
The application of Yuanzheng mineral powder pellet binder pellet binder can also reduce steel material consumption and lime consumption. It has been used in many industries such as ironmaking, steelmaking, and iron furnaces.
2. Instructions for use
For the amount of mineral powder to be added, first stir the raw materials and binder in dry powder state and then transport them to the mixer with a conveyor belt. Install a water tank on the mixer. According to the humidity of the raw materials Adjust the amount of water added, stir the above raw materials evenly and then put them into the briquetting machine
Iron powder forming agent/steel slag powder pellet adhesive/fluorite powder adhesive wholesale, sulfur-free and phosphorus-free